| Customization: | Available |
|---|---|
| After-sales Service: | Installation/Commissioning/Training |
| Warranty: | 15months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Voltage
|
500v/600v
|
|
Frenquency
|
50/60HZ
|
|
Max. output current
|
200ua
|
|
Output power voltage
|
0-100kv
|
|
Input Air pressure
|
0.3-0.6Mpa
|
|
Powder consumption
|
Max 550g/min
|
|
Polarity
|
Negative
|
|
Gun weight
|
480g
|
|
Length of Gun Cable
|
4m
|
How does powder feed center work?
Put the powder hopper full with powder in the powder supply room, and on the powder hopper vibration platform, and then access the air for the fluidization of powder. Vibration platform will vibrate at intervals. Powder particles generated in the process of fluidization goes through the rear ventilation pipe so that powder doesn't spill. In the process of powder gun working, the powder pump station will be decreased, so that the suction tube is inserted into fluidizing powder.Control the pump station decreasing by powder detecting sensor, so that the powder suction tube keep been inserted into the sufficient fluidization powders. With powder level declining, when the powder level reaches the lower limit, the powder center of the electronic control system will issue audible alarm and on the touch screen with character note. Remind the operator low powder level alarm, and he or she needs to add powder. In the cleaning process, lower the pump platform down to the powder cleaning level. Open and clear the powder. Powder center automatically blowbacks the powder gun hoses of both sides alternately.
If change the color, rise the pump station to higher point for the powder hopper can be easily removed, and then carried the powder hopper with required color in.
| Product Applications |
Q1: How long your delivery time?
A 1:Generally 4-10 workdays after payment
Q2: What is your term of payment?
A 2: Multiple ,We can discuss each other .Such as paypal, T/T, L/C etc.
Q3: What is your pre-sales service?
A 3: *Enquiry and cousulting support.
*Technology solution and quotation
*Customer visit our company and check our production .
Q4: Could you provide the design for me?
A 4: We would like to provide the design for my customer. Just let me know product information and your requirements like produci size ,picture materia and output field etc. We will make a layout according your requirements.
){kind=link}